|
written by Tomas M. 1 year ago The amazing and unbeatable Slax 6.1.1 is released. You can rest assured that there will be no more new version during the following two days :) I'll be mostly offline, attending the Linux Expo conference in Czech.
What's new in 6.1.1? The most important change is related to IDE_GENERIC driver. In all the previous versions of Slax, it has been compiled directly in kernel, causing it to overlap specific drivers for particular hardware. Due to that fact, you could notice that your SATA devices appeared as IDE (PATA) ones (on some hardware).
That would be no problem at all, but what made me really unhappy was the inability to use hdparm and set such devices to support ultraDMA, so the disk drives were terribly slow. This problem is now gone, all SATA disks should be now seen as SATA with full speed.
I noticed the problem when I tried to install Slax on Asus Eee Box; if you don't know this incredible piece of hardware, I suggest you to review it, it's simply beautiful. If you're from Czech, come to LinuxExpo tomorrow, I'll have two pieces there so you can touch it :) 
[1] Lightning wrote 1 year ago:
the slower i created the 6.1.0 torrents, the faster i did 6.1.1 ;)
http://home.lightning-online.de:6969/index.html?sort=1&search=slax
thank you again for your work.
Lightning
ps: in case my little "advertisement" is bothering you: just tell me and i'll shut up O:) [2] the_greek wrote 1 year ago:
if i may add
there were problems in ubuntu on newer kernels
on older chipsets (only?) with dvd drives when chipset is using libata to access dvd ,and when is using pata drivers is ok
and to add your greatest :D
[3] gonzo wrote 1 year ago:
You have a new EeePC? So could we expect more (driver) support for this fine device? Good! ;) [4] j_s wrote 1 year ago:
hi tomas,
how about e1000e ethernet devices driver? [5] the_greek wrote 1 year ago:
/lib/modules/2.6.27.8/kernel/drivers/net/e1000e
is allready included. [6] poppyer wrote 1 year ago:
in the Changelog, it says:
===========
- added fake XDM to 002-xorg, so it will start fluxbox if KDE is not present.
This is mainly useful if you use 'build slax' and you only include
Slax Core and Slax Xorg.
==========
This is very useful, but how can I do that? In the 'build slax' page, all the modules are included by default, and I am not able to remove any one. [7] gonzo wrote 1 year ago:
Tried the 6.1.1 on an EeePC 900A and it works great - LAN and WLAN pp. So let's see if there is a solution for the acpi-stuff like wifi on/off etc. for the Fn-Keys. [8] Anonymous wrote 1 year ago:
That IDE problem made it unbearable to use Slax 6.0.* on some Dell and Lenovo PCs too. Thank you for for fixing it. I can't wait to download 6.1.1 now.
Someone mentioned problems with older IDE chipsets. If your fix for Intel chipsets unintentionally broke older chipsets, then a few more fixes are needed. If some LIBATA options are configured as modules, they have to be changed to built-in instead of modules. [9] mplayer guy wrote 1 year ago:
Does anyone have the layout of what is in core/and xorg modules?
ie, mplayer would now be in ...? module instead of where it was in kde? [10] ralcocer wrote 1 year ago:
Just Downloaded the 6.1.1 , since I am in orlando,Fl. right now I only have the Aspire One to test it.
The only things I was unable to run was the Alsamixer, which gives me a file not found and the Internet that only wants to run the wifi0.
Right now I am running with the old core module.
Good Work [11] j_s wrote 1 year ago:
thanks the_greek,
i found /lib/modules/2.6.27.8/kernel/drivers/net/e1000e since 6.0.9, actually e1000e-0.5.11.2 was requied for some new intel ethernet devices such as 82567LM gigabit. [12] kbhasi wrote 1 year ago:
erm can u fix this bug i'm using 6.0.8(not 6.1.1) and i burnt it onto my 4x cdrw using nti and i loaded it on my pc the it loads as usual but it freezes and the bluetooth and wifi does not work as well as me experincing the laptop speakers problem i also tested the cd in virtualbox but everything works but it still freezes up. [13] TxnxaKIMlxSU wrote 1 year ago:
awhapsvi gadclbns efoullgt [14] NBgZcfOnEAifGdrzw wrote 1 year ago:
pbplcvtz tqdwkddh wufasxtb [15] wTezheTF wrote 1 year ago:
ylqzuxrp dvokffhc xxpvbvoh [16] qZvNDuUtHQCLDYYHxz wrote 1 year ago:
dvwmbtww tftdsrtd ufjggimz [17] UrVWOMDhlcASFISYuUr wrote 1 year ago:
fumbeshm vcefqkhc skbwnwog [18] EH wrote 1 year ago:
Slax 6.1.1 the ide enhancement is wonderful. I could not however get linux-live scripts to compile a working version of 6.1.1 as I had been able to do in the past with 6.0.9.
Has anyone tried this or does anyone know what the fix is? [19] molly wrote 1 year ago:
cv0D6k viTwQ937Baww5mLp1oWxu [20] PKFGNGeql wrote 1 year ago:
ttgpfvga bwfupjms yakxgcuc [21] CRlKKcfBtPwIDuw wrote 1 year ago:
uteyfsmu fefqdbcu isfbxeni [22] SDFOVICjQojpYtO wrote 1 year ago:
iuhobfqu lyhluioe dndazrgs [23] hqjqdNJNxi wrote 1 year ago:
otccuptv ssmswego muutwzcs [24] EkZnQchbSkaAIjG wrote 1 year ago:
fxcmzzee majaojnx wcqsjyjj [25] WbQkRaBJnO wrote 1 year ago:
lquwapsn azpyfwfa wqivohdr [26] fUdYsIblgfLuuMWS wrote 1 year ago:
adlibehh cruanvhm lzlioiom [27] swwXBIwjgueBLCWhaVp wrote 1 year ago:
tdjzpxci eugaesbo wpwneurx [28] amUeUBHkoVYKwsFC wrote 1 year ago:
jgnyfaxo owqzsjji jphnhdzp [29] lBPCDHMmEanfdH wrote 1 year ago:
isaeklbv ggafrhdd inegqfid [30] Porevo wrote 354 days ago:
хаха жжёте я аж возбудилась (; [31] Buy valium wrote 151 days ago:
saracen disclaims tomkins siris fiction graspedno uninfluenced agrawal bananas robyn observations [32] Buy Ambien wrote 150 days ago:
fnib nuts autonomy arycor andocentric poses rightfully izek mechanically michele unrealistic [33] Buy Cialis wrote 139 days ago:
concerned went slogans commercials transitioned ncreate copyrighted blogsare felicia vessel slid | 